Gate Valve Manufacturer & Supplier in India
Ridhiman Alloys is one of the leading Gate Valve Manufacturers in India. Our high-quality range of Gate Valves is exclusively designed for chemical industries, steel factories, petrochemical industries, fire protection systems, paper manufacturing industries, shipping/shipment industries, etc. These are designed and developed by the international quality standards. Gate Valves that are precision engineered using the best quality raw material. We also customize Gate Valves as per the client's requirements.
Types of Valves
Ridhiman Alloys, an estimable Gate Valve Manufacturer in India, is your reliable source for top-notch Gate Valves. Check out the various types of Gate Valves offered by Ridhiman Alloys:
Knife Gate Valve
Product Description:
Knife Gate Valves have The advantages of compact structure, reasonable design, material saving, reliable sealing, convenient operation, small volume, full passage flow, small flow resistance, small weight, and easy installation and maintenance.
Types:
Through Going Gate Valve, EN Wafer Knife Gate Valve, Wafer Knife Gate Valve, Mono-Block Knife Gate Valve, 3Fully Lugged Knife Gate Valve.
Size range:
2 - 50"NB.
Slab Gate Valve
Characteristics:
150-2500lbs class,
Quality Tested.
Size:
1 - 40"
Stem material:
13% Cr / 316 / 304 .
Material:
Body / bonnet material: WCB / 316 / 304
Seat material: 13% Cr plus PTFE / 316 plus PTFE / A105 plus ENP plus PTFE
Disc material: 13% Cr / 316 / A105 plus ENP
Threaded Gate Valve
Characteristics:
Investment casting body
Screwed Bonnet wedge disc
Integral Seat.
Size:
1/2″, 3/4″, 1″, 11/2″, 11/4″, 2″
Material:
SS 316 (ASTM A351 CF8M), SS 304( ASTM A351 CF8), WCB.
Cast Steel Gate Valve
Characteristics:
Solid, Flexible or Split Wedge Design
Back-seating, Renewable Seat Ring
Full Port Or Reduced Bore
Optional Upset forged T-head Stem Design.
Size:
2 - 48″NB
Material:
WCB,LCB,CF8,CF8M,CF3,CF3M,WC6,
WC9, C5,C12 or Equivalent, Available also in low temperature steels, low alloy steels, stainless steels, duplex type stainless steels and other exotic materials; Various trim materials available to suit service conditions.
DIN Gate Valve
Characteristics:
Full bore Ensured
Solid Wedge Disc
Suitable medium: water, oil, gas.
Size:
DN40- DN600
Material:
Metal Seat (Brass ,Bronze or Stainless steel Trim).
Bellow Sealed Gate Valve
Characteristics:
Face to Face Dimension: Manufacturer Standard
Construction: Standard & Sealing Type
High Pressure Ratings.
Size:
3 - 42"NB
Material:
WCB,LCB,CF8,CF8M,CF3,CF3M,WC6,
WC9, C5,C12 or Equivalent, Available also in low temperature steels, low alloy steels, stainless steels, duplex type stainless steels and other exotic materials; Various trim materials available to suit service conditions.
Forged Steel Gate Valve
Characteristics:
Constructions:OS&Y Construction, Bolted Bonnet, Welded Bonnet & Pressure Sealed Bonnet Back-seating, Renewable Seat Ring
Full Port / Conventional Port
Optional Upset forged T-head Stem Design High Pressure Rating.
Size:
1/4″ to 4″NB
Material:
A105, F304,F316 or Equivalent, Available also in low temperature steels, low alloy steels, stainless steels, duplex type stainless steels and other exotic materials; Various trim materials available to suit service conditions.
Cryogenic Gate Valve
Characteristics:
Double Bellow & Sealing, Convenient Maintanence, Position Indicator Flanged Dimension: ANSI/ASME B16.5, JB79, S.W Ends: ANSI B16.11, Screwed Ens: ASME B1.20.1
Face to Face Dimension: ANSI/ASME B16.10, GB/T12221
Inspect & Tested.
Size:
3/8″ to 2″NB
Material:
WCB,LCB,CF8,CF8M,CF3,CF3M,WC6,
WC9, C5,C12 or Equivalent, Available also in low temperature steels, low alloy steels, stainless steels, duplex type stainless steels and other exotic materials.
Resilent Gate Valve
Characteristics:
Full bore Ensured
Solid Wedge Disc
Metal Seat (Brass, Bronze or Stainless steel Trim)
Suitable medium: Water, oil, gas.
Size:
DN40 - DN600
Pressure Sealed Gate Valve
Characteristics:
Solid, Flexible or Split Wedge Design
Pressure Sealed
Back-seating, Renewable Seat Ring
Full Port Or Reduced Bore
Optional Upset forged T-head Stem Design.
Size:
1/2 - 20″NB
Material:
WCB,LCB, CF8,CF8M, CF3,CF3M, WC6,
WC9, C5,C12 or Equivalent, Available also in low temperature steels, low alloy steels, stainless steels, duplex type stainless steels and other exotic materials; Various trim materials available to suit service conditions.
Sliding Gate Valve
Characteristics:
Standard & Sealing Type Construction
Flanged Dimension: ANSI/ASME B16.5, JB79,
Face to Face Dimension: Manufacturer Standard
Inspect & Tested.
Size:
3 - 42″NB.
Material:
WCB, LCB, CF8, CF8M, WC6, WC9, C5, C12 or Equivalent, Available also in low temperature steels, low alloy steels, stainless steels, duplex type stainless steels and other exotic materials; Various trim materials available to suit service conditions.
API Gate Valve
Characteristics:
Gate Valve Class 300 NPS 26,
Rising Stem,
Flexible or Solid Wedge Bolted Bonnet,
Welded Seat Ring.
Size:
2 - 48″NB
About Gate Valves
Gate Valves are used once a straight-line flow of fluid and minimum restriction is desired. Gate valves are thus named as a result of the part that either stops or allows flow through the valve, which acts like the opening or closing of a gate and is called, suitably, the gate. The gate is sometimes wedge-shaped. Once the valve is wide open, the gate is drawn up into the valve, leaving an opening for flow through the valve the same size as the pipe within which the valve is put in.
As a well-known Gate Valve Supplier in India, the valve has a tiny pressure drop or flow restriction. Gate valves aren't appropriate for throttling functions since the flow control would be challenging due to valve design, and fluid slapping against a partly open gate can cause in depth harm to the valve. Except as explicitly licensed, gate valves should not be used for throttling.
Ridhiman Alloys is a prominent Gate Valve Manufacturer in India. They supply superior, easy operation, which may maintain and regulate high volume and warm temperature flow. Most Gate Valves provide rugged construction with an extended service life and a comparable low price. In addition, the planning of the regulating part permits the valve to operate without the complications of aspect hundreds, typical of the categories of globe or Gate Valves, and the valve style permits examination and repair of seats and seals without removing the valve's body from the pipeline.
Ridhiman Alloys Is A Leading Supplier, Stockist, Exporter And Manufacturer Of Gate Valve India
Ridhiman Alloys is the most trusted Gate Valve Supplier in India. We are an ISO 9001:2008 certified company that has existed since 2007. Gate Valves are designed to control and help flow gases, liquids or other materials.
Our manufactured Gate Valves contain prime-quality materials. Factory-made from quality grades meeting ASTM and AISI standards. As a result, the higher the standard, the higher the toughness of the Gate Valves. Prime quality steel content makes a gate valve harder and will increase its hardness. We specialise in Suppliers and stockists of Gate Valves in India. Ridhiman Alloys is an ISO-certified Supplier and stockist in India. We are widely known in India for our prime-quality gate valve products.
Product dependability and performance have created Ridhiman Alloys, a leading Gate Valve Manufacturers in India. We export Gate Valve products to India, porting around sixty-five containers monthly to different customers. Our prime quality of Gate Valves, sensible client service, and in-house Gate Valve processing capabilities have made us one of the emerging and leading stockists of Gate Valve in India. Our product, the Gate Valve area unit, is exported frequently to over sixty-five countries. Over the last 11 years, we have equipped over 2500+ plenty of Gate Valves in India. Orders are secured at the Ridhiman Alloys area unit, and we offer quick delivery of Gate Valve in India. The most important reason is that we've lovely repositioning and storage facilities for each finished and semi-finished Gate Valve. They're finished as per the pressing necessities and customers' requirements.
Cities We Supply Gate Valve:
Ridhiman Alloys has maintained to make a name as a Gate Valve suppliers in India. We often transport Gate Valve to various cities in India, such as Pune, Nashik, Ahmedabad, Surat, Jaipur, Chennai, and Bangalore. We currently serve clients in over 50 cities across India. We are the most trusted Gate Valve suppliers in India.
Mumbai Valves
Manufacturers
Bengaluru Valves
Manufacturers
Hyderabad Valves
Manufacturers
Chennai Valves
Manufacturers
Surat Valves
Manufacturers
Lucknow Valves
Manufacturers
Ridhiman Alloys is a leading Exporter of Gate Valves Worldwide:
Ridhiman Alloys is a trusted Gate Valve Exporter in UAE, Saudi Arabia, Qatar, South Africa and the USA. We ship regularly to these countries. With a robust global presence, we proudly export Valves that meet international standards and fulfil all our customers' requirements worldwide. We are a top Gate Valve Stockist in India.
Saudi Arabia
Oman
Kuwait
Bahrain
Qatar
UAE
Nigeria
Mexico
Canada
Singapore
Sri Lanka
Australia
Brazil
Bangladesh
Turkey
Venezuela
Iran
Netherland
Payment Mode
L/C (Letter of Credit), T/T (Bank Transfer), Other
Port of Dispatch: Mumbai OR KALAMBOLI India
Packaging Details: Fitting are given marking, painted with black japan or black Board (Mat
Finish) & will be packed in a bagging bag with stickers written with size, grade & quantity.
Primary usage
Gate Valve Manufacturer & Supplier
Saudi Arabia
Bahrain
Oman
Qatar
Kuwait
UAE
Nigeria
Turkey
Sri Lanka
Bangladesh
Brazil
South Africa
Netherlands
Singapore
Italy
Venezuela
USA
Canada
UK
Malaysia
Quality Inspection
